You can choose a Lexan Back with Dual Vents
Or a Soft Back Panel with a Zip open Window
Cab Enclosure: The Can-Am Defender Full Cab Enclosure with Steel Doors includes a Split Two Piece Lexan Windshield, Soft Top, Steel Doors and a Lexan Back Panel. The Cab Enclosure is a fantastic combo made from the finest materials available. This is a modular Cab, so all panels connect to each other. These are not sewn together and that means you have the freedom to remove or add panels as the seasons change.
Steel Doors: The Steel Doors are made out of 11 gauge steel. The door frame is supported by an 11 gauge frame which the steel doors close against. We incorporate multiple pieces of 3/8” steel rods to make the frame as solid as we can. The steel door frame is covered with 11 gauge steel and a ¼” Polycarb window. The steel portion of the frame is painted with a truck bed lining paint.
Lexan Door option: The Doors are made out of Lexan. The Lexan Door frame is supported by an 11 gauge frame which the Lexan Doors are attached to. We incorporate multiple pieces of 3/8” steel rods to make the frame as solid as we can. The steel door frame is covered with Lexan including a ¼” Polycarb window next to the Door. The steel portion of the frame is painted with a truck bed lining paint. The back panel of the door kit is made of ¼” Polycarb for maximum visibility. The Lexan Doors incorporate a paddle latch to open and close.
It includes Dual Vents in each Door. We have added trim around the door to create a seal.
Lexan Windshield & Lexan Back Panel: The Split Two Piece Lexan Windshield is & solid Lexan Back Panel is 1/4" Lexan 9034 for our Standard & Premium Windshields which is much stronger than the 3/16" versions that will bow at high speeds with fast sports UTVs. For our Deluxe Windshield we use Scratch Resistant Lexan MR10. If you are going to attach wipers to your Windshield, you will need to use our Deluxe Windshield. We highly recommend Dual Vents as an extra add on. Why wouldn't you at just $10.00 more for the Dual Vents.
All Pacific Eagle UTV Lexan Windshields are D.O.T approved.
Clamping Systems: We use 6 Clamps for our Standard, Premium & Deluxe Lexan Windshields.
Loop Clamp: These are a more permanent fixture for your Windshield to the roll bar and are only available with our Standard Windshields.
Simple Grip Straps: These are our new clamping system that makes installing and removing your Windshield very easy. They are tough, easy to use and won't let you down & are available with our Standard & Deluxe Windshields.
Quick Connect Clamps: These make installation a breeze. After the clamps are on your rollbar, you never have to remove them to take your Windshield off. Just loosen the knob bolts to remove the Windshield. Easy on.....solid fit.....then easy off. They are available with our Standard & Deluxe Windshields
Edging: Our Premium & Deluxe Lexan Windshields include a 2" strip of rubber edging along the bottom and both sides. This protects the Windshield from hitting the rollbar when running hard, the rubber edging stops that cold.
Standard Windshields include a 2" strip of rubber edging along the bottom.
Materials: Pacific Eagle UTV uses the finest professional grade marine fabric made of 100% polyester with stay-true long lasting colors with stabilized fit of less than 1% stretch or shrinkage. Our marine fabric is water repellent, tear resistant, puncture resistant, mildew and UV resistant. The Door Windows & Rear Window is made of durable Aqua-View Smoked vinyl allowing for an uninhibited view and total clarity. Pacific Eagle UTV uses marine sewing thread made from selected high tenacity, heat resistant, continuous multifilament polyester yarns. Along with the highest quality materials, all Pacific Eagle UTV Enclosures are hand measured and handcrafted to ensure a precise fit.
Enclosure Colors: You have a choice of 3 colors - Onyx Black - Mossy Oak New Break-Up - National Guard/Woodland Camo.
The color chart is below.
Simple Grip Straps
Quick Connect Clamps
Tinted Windshield USD$150.00